Alternatively enquire about this product to learn more
Lifetime Structural Warranty
Australian Designed
Engineering Certified
Easy to assemble and/or Easy to install| Code: | Type: | Finish: |
| RH0269 | Column U-shape 400mmH | Orange |
| RGGH250 | Column U-shape 400mmH | HDG |
| RH0273 | Corner L-shape 400mmH | Orange |
| RGGH251 | Corner L-shape 400mmH | HDG |
Column Guards
The GMJ column guard is designed to provide additional protection for you columns to help prevent fork strike.
The U-shaped type column guards are designed to go around the columns in your aisles. It is recommended that if using column guards in the aisles that a minimum 2743mm internal width beam is used to allow enough room for pallet entry below 400mm.
Available in 2 finishes – Hot dipped galvanised (RH0272) and powder coated orange (RH0269)
Corner Guards
The GMJ Corner guard is designed to meet your minimum cross aisle and gang way safety requirements under the AS4084:2023 standard.
Corner guards are required at the meeting points of all cross aisles and gangways (usually this means two per end of a pallet rack aisle unless that pallet racking aisle is against a wall).
GMJ offers two finishes; Standard powder coated orange 400mm high (RG0273) and hot dipped galvanised 400mm high (RGGH251)
Apex Rack Protection
Minimum acceptable requirements to be compliant with AS4084-2023
Please note M14 screw or M16 stud anchors are the minimum requirement for anchor type
M10 screw or M12 stud are NOT sufficient
| CODE | DESCRIPTION | No. OF ANCHOR POINTS | MINIMUM ANCHOR QTY REQUIRED | MINIMUM ANCHOR EMBEDMENT DEPTH |
| RH0269 | Column Guard 400mm high U-shaped | 4 | 4 | 65mm |
| RH0273 | Corner Guard 400mm high L-shaped | 4 | 4 | 65mm |
| RGGH250 | HDG Column Guard 400mm high U-shaped | 4 | 4 | 65mm |
| RGGH251 | HDG Corner Guard 400mm high L-shaped | 4 | 4 | 65mm |
Address
4/18 Racecourse road
Pakenham 3810
0408180869
Monday – Friday
8:00 AM – 4:00 PM
